3:1 Bubble Free Crystal Clear Epoxy Resin
Brand : Crystal Rock
- Product Code:
- EP04
- MIXING RATIO:
- 3:1 BY WEIGHT
- CURING TIME:
- 24HRS
- POT LIFE:
- 30MINS
- GRADE:
- ARTIST GRADE
*NEW* Bubble Free 3:1 Very Low Viscous Crystal Clear Epoxy Resin
Excellent Clarity, High Transparent, Crystal Clear Epoxy Resin for Large Castings, Jewelry, Flower Preservation, Resin Art?
The Crystal Rock 3:1 Bubble Free Crystal Clear Epoxy Resin system is ideal for large castings. You can use it for layers up to 2cm thick without any bubbles. The number of casting processes (layers) is unlimited.
* NOT INTENDED FOR OUTDOOR USE OR INDUSTRIAL USE.
KEY FEATURES:
- Artist Grade: High-Quality Casting Crystal Clear Epoxy Resin.
- Very High Transparent & None Yellowing.
- 3:1 by Weight mixing ratio.
- 30 minute working time (Pot Life).
- Casting layer up to 2m thick without bubbles, unlimited number of casting layers.
- UV Resistant, Self-leveling & de-foaming resin.
- Curing Time: 24hrs.
WHAT ARE THE BEST USES OF THIS 3:1 BUBBLE FREE CRYSTAL CLEAR EPOXY RESIN SYSTEM?:
- CASTING: Casting with silicone molds, Flower Preservation, make Jewellery, e.g., Bangles, Rings, Earrings..etc., Ornaments & Encapsulating Objects.
PACKAGE SIZES:
Size 1 (120g pack): Two bottles 90g of Resin, 30g of Activator/Hardener (120g Total) (±1%)
Size 2 (400g Pack): Two bottles 300g of Resin, 100g of Activator/Hardener (400g Total) (±1%)
Size 3 (1kg Pack): Two bottles 750g of Resin, 250g of Activator/Hardener (1000g Total) (±1%)
DRYING TIME (CURING):
Dry to Touch: 12 hours
Recoat within: 5-8 hours
Curing: 24 hours
Complete Curing: 4-7 Days
| ADDITIONAL INFORMATION: |
| SAFE HANDLING OF EPOXY SYSTEMS |
| HAZARD WARNINGS |
| WHAT YOU SHOULD AVOID |
| STORAGE |
| SAFETY INSTRUCTIONS |
Important: Liquid Epoxy Resin Intended for Industrial & Professional Use Only
- The measuring ratio (by weight) must be accurate. The wrong ratio makes epoxy resin soft and will not cure properly.
- Mix two parts thoroughly. If not mix well, epoxy will become sticky and will not cure properly.
- Avoid high humid days, or work in a controlled humidity environment. Humidity over 75% may affect the curing process and end product.
- Do not mix organic pigments or dye and liquid pigments/inks containing water.
- Epoxy resin is sensitive to any moisture. For this reason, we recommend not bringing the epoxy resin into contact with water until it has been cured entirely chemically (at least three days). In thin layers, cold temperatures (ambient, substrate, and resin temperature below 20° C) and increased humidity until the epoxy resin has cured completely can be longer.
