Categories

Artland දෙසැම්බර් 24 වන දින දක්වා විවෘතව ඇත, බෙදා හැරීමේ ඇණවුම් 2025 ජනවාරි 1 වන දින දක්වා නවතා ඇත.
Artland's physical shop will be open until 24th December, and delivery orders are paused until 1st January 2025.

Silicone Bookmark Making Mold Epoxy Resin 2 Pcs/Set

Brand :

(No reviews yet) Write a Review
‎Rs790.00
Product Code:
RM131
Shipping Weight:
0.05 KGS
  • Unique Design -- The design of pin in the mould, make the pendant produced with hole, you can get across with string or chain, perfect for bookmarks or other pendant.
  • Multi-function --Suitable for making earrings, necklace, key chain and other jewelry pendants, and the jewelry produced can used to decorate your room, or send to your friends as a gift.
  • High Grade Material -- Silicone material is durable, reusable and flexible high mirror effect, which can resile instantly after pull or pinch.
  • Delicate Workmanship -- The workmanship of mold is delicate; inside is smooth, so the jewelry produced is flat, will not appear an uneven flaw.
  • Good Heat & Cool Resistant -- Working temperature ranges from -40℃ to 230℃.

Bookmark Making Steps:

  1. Smear the mold release agent on the silicone mold.
  2. Lay the flower in the mold.
  3. Hit epoxy by boiled water, but can't touch the water.
  4. Mix the epoxy to suitable ratio.
  5. Mix toner into the epoxy.
  6. Pour the epoxy into mold.
  7. Wait until epoxy curing.

Specifications:
Materials: silicone (Temperature support: -40℃-230℃)
Color: as shown
Size: Large: 15.5 × 3.5 cm / 6.10 × 1.37inch
Small: 10.5 × 3 cm / 4.13 × 1.18inch
Package Included:
Quantity: 2 pcs

1 × Large bookmark mould
1 × Small bookmark mould

Important:

  • After pouring into the resin, it must be taken out within 36 hours.
    Use mold carefully, do not scratch with a tool or finger nail.
  • How to clean: Each use, please clean the resin casting molds with rubbing alcohol or soapy water, and use a soft cloth to wipe clean.
  • How to store: Please store the silicone art resin molds away from direct sunlight and dust.
  • How to de-mold: It can be taken out just by pulling the resin mold. You can also use a mold release spray. If you don't have, you may use a baby wipe or a drop of soap mix with a bit of water as a release agent.
  • Note: Please make sure your resin piece is fully cured. (The time to complete solidification depends on the type of material you used)
    Warning: For the small pieces, please keep away from babies, kids, children.