Liquid Silicone Rubber for Mold Making (Mold Silicone)

1:1 Ratio Mold Making Liquid Silicone Rubber Now Available in Sri Lanka

Ideal for Epoxy Resin, Soap, Candle, Concrete, Plaster of Paris, Gipsom Molds.

KEY FEATURES OF LIQUID SILICONE RUBBER (LSR):

1. Weight Ratio:1 (A Silicone) : 1 (B Hardener/Catalyst) by weight
2. Curing Time 3-5 hrs (Fast Curing)
3. Pot Life: 15Mins
4. Temperature resistance from -50℃ to 180℃, acid and alkali resistance.
5. Good elasticity, high duplication times.
6. Low shrinkage to keep the finished production with perfect size.
7. Environmental friendly and non-toxic, the shelf life up to 12month.
8. Ideal for Resin Molds, Polymer Clay Molds, Concrete, Gypsum, Candle, Soap mold making.

Important: This Product Intended for Industrial & Professional Use Only

• Thin, Low-medium viscosity Liquid Silicone (Consistency similar to coconut oil)
  
• Mix two parts thoroughly, if not mix well, silicone rubber will become sticky, and will not cure properly.
• Please use exact measurments for proper curing.

Liquid silicone rubber for mould making, which are widely used for resin molds, molding objects, ornaments, sculptures, statue, manual design, plaster, arts and crafts. And this kind of silicone is ideal for product designers to make prototype design /rapid prototyping and resin molding. It can be cured under normal room temperature, with the feature of non-toxic, non-odor, natural de-foaming, good liquidity and good toughness.

Silicone mold making kit, liquid translucent silicone rubber for silicone moulds 1:1 mixing ratio silicone to replicate objects, Crafts. Especially formulated for resin molds, wax molds, candle molds, soap molds, casting molds and making molds of architectural details, statues, figurines!

Mold Making Silicone Kit Includes: 2 bottles

Technical Information on mold making silicone rubber:

What's Included:

• 100g Set (50g Silicone Part A, 50g Part B)
• 200g Set (100g Silicone Part A, 100g Part B)
• 400g Set (200g Silicone Part A, 200g Part B)
• 1000g Set (500g Silicone Part A, 500g Part B)

Instructions (How to Mix Mold Making Silicone Resin):

Step1: Weigh the silicone according to the items mixing ratio 1:1.
Step2: Mix two parts thoroughly, these two parts need mixing thoroughly to avoid incompletely cured.
Step3: Put the mixture into the vacuum machine to remove the bubbles (Optional)
Step4: Pouring the mixed silicone rubber into the frame with your design in.
Step5: Waiting for the silicone rubber fully cured then demold.