3 Tier Round Tray Stand Molds for Epoxy Resin

3 Tiered Tray Mold for Epoxy Resin, Round Cake Serving Stand Molds for 2 Sets of Hardware Fittings.

KEY FEATURES:

• The tray mold is about 9.84/7.87/5.9 inch from big to small molds. They are flexible, smooth & reusable.
• Tiered serving stand are carved with sleek wavy edges and embossed with flower patterns, full of grace and romantic feeling.
• Resin silicone molds have smooth interiors, so the finished product is flexible and easy to take off from the mold.
• The whole cupcake stand has strength & stability by connecting the tiers with solid pillars and screws & requires no tools.
• Ideal for various events such as wedding, engagement, Awrudu, birthday, party, Christmas etc. Perfect for displaying cupcakes, appetizers, brownies and other party treats.

EASY TO RELEASE: You could easily release your creation out the tray molds after the resin is completely cured. Demold the epoxy molds with soap water and storage them away from direct sunshine.
NOTE: The tray molds are suitable for casting resin only, not for coating resin. The torch and heat gun is not recommended to use as the heat will damage the mold.

TECHNICAL DETAILS:

• Material: Silicone
• Dimensions:
  Large: 24.3cm/9.84
  Medium: 19.2cm/7.87
  Small: 14.7cm/5.9 inch
  Thickness: 8mm (Full) 6mm (inner)
• 3 Tiers Crown Bracket & Screws resin tray mold

PACKAGE INCLUDES:

3 Tiers Resin Silicone Mold Set*

• 3x round silicone molds
• 2x Sets of 3Pcs metal connecting hardware fittings

* Finished 3 stage Resin Tray Shown in the image is not included, only the 3 stage tray making molds and hardware fittings are on offer under this listing.

How to use:

1. Pour the curing agent and resin according to a specific ratio and mix them thoroughly.
2. Use pointed tweezers to add and adjust the desired fillings, and use a toothpick to remove the bubbles.
3. Use some mold release agent before pour resin, so it's easy to separate the resin from the mold, which will extend the service life of the mold.
4. Pour the resin into the mold and stir slowly, let it stand for 24 hours.
5. After the finished product is completely cured, pour some soapy water into the mold to help demold.